Filter By:
Accessories/Parts

$49.99
Yakima's HandCuff keeps your bikes secure when attached to the SwingDaddy and RidgeBack (both sold separately). Plus, there's a universal key and an additional SKS Lock Core so you can have the same key that locks your bikes to the rack and your rack to the hitch.

$29.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

$49.99
- Updated design, for use with all Saris racks where bikes are secured by the top tube
- Bridges the gap from stem to seat tube, creating a virtual top tube
- Useful on ladies and specialty frames

$24.99
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

$15.99
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

$10.99
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

$225.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

$4.50
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty

$39.00
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop.
Product Details
- Durable stainless steel axle and body
- Easy to adjust end nut and cam lever
- Lockable with a SKS lock, sold separately
- Includes 9mm x 135mm threaded adapters for Yakima ForkChop
- Includes 135mm sleeve for use on Yakima HighSpeed
Product Specs
- Weight: 1.15 lbs
- Dimensions: L 9.50" x W 3.50" x H 1.25"

$33.00
Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.

$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

$126.00
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars.
Product Details
- Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market
- Complete set of 4 Landing Pads with no additional tools required
- 33" crossbar spread allows most Yakima gear mounts
- Snap-on covers to keep the elements out while the rack is removed
- Weight: 1.35 lbs
- Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

$79.00
The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure.
- Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb
- Fully adjustable in height to match your cab's roof rack perfectly
- Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more
- Aluminum construction engineered for strength
- Durable black powder-coat finish
- Included anchor straps secure the LongArm, preventing side to side movement
Product Specs:
- Weight: 3.00 lbs.
- Dimensions: L 2.50 in x W 2.00 in x H 28.25 in
- Limited Lifetime Warranty

$126.00
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight.
- Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails
- Range of shapes lets you find the precise, secure fit specific to your vehicle
- Unique inner and outer clip design delivers exceptional hold
- Powder-coated stainless steel provides maximum strength and durability
- Sold in sets of four – just one kit sets up your system

$30.00
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers.
- Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four.
- Includes 4 RoundBar end caps
Product Specs:
- Weight: 0.42 lbs.
- Dimensions: L 2.00 in x W 2.00 in x H 1.00 in
- Limited Lifetime Warranty

$40.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 2 SKS Cores and matching keys
- 2 keys included plus a control key

$60.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 4 SKS Cores and matching keys
- 2 keys included plus a control key

$80.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 6 SKS Cores and matching keys
- 2 keys included plus a control key

$100.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way.
- Fits all lockable accessories
- Includes 8 SKS Cores and matching keys
- 2 keys included plus a control key

$15.00
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle.
- Easy cam lever for quick installation
- Durable stainless steel skewer
- Up to 110mm front hubs
Product Specs:
- Weight: 0.44 lbs.
- Dimensions: L 9.00 in x W 0.75 in x H 2.00 in
- Limited Lifetime Warranty

$19.95
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

$14.95
The Thule Xadapt 3 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

$14.95
The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

$14.95
The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

$129.95
Wind fairing that redirects airflow over the roof rack for a quieter ride.
- Attaches to Thule WingBar Evo, WingBar Edge, AeroBlade, AeroBlade Edge, and SquareBar Evo with included hardware
- Around the bar tool-free mounting allows for quick T-track access
- Clip-on design requires no tools for assembly or installation

$129.95
Wind fairing that redirects airflow over roof rack for a quieter ride.
- No tools required for assembly or installation.
- New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge and SquareBar systems.
- AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal.
Technical specifications
- Length: 32-inch
- Fits Thule AeroBlade
- Fits Thule SquareBar

$74.95
The Artificial Rain Gutters from Thule let you attach any of their classic cargo racks (sold separately) to vehicles that lack integrated rain gutters. These are most commonly installed on camper tops, pickup truck caps, and Jeep Wrangler tops. This set includes four Artificial Rain Gutters and rubber gaskets to protect your car's finish.
Page 1 of 7
Next page